Dynamic fatigue testing machine
Electronic universal testing machine
Electro-hydraulic servo universal testing machine
Automated test scheme
Pendulum impact testing machine
Drop hammer impact testing machine
High temperature creep endurance testing machine
Horizontal testing machine
Special testing machine
Standard machine
Spring testing machine
Electric insulator testing machine
Fastener testing machine
Function summary:
This machine is suitable for aluminum wire, steel wire, copper wire, aluminum covered wire and other wire and cable in unidirectional or bidirectional torsion to withstand plastic deformation ability and display the surface and internal defects of the wire, while measuring the winding performance of the wire and cable。
Relevant standards:
GB/T 2611 "General Technical Requirements for Testing Machine"
JB/T9376 "Wire torsion testing machine Technical Conditions"
GB/T 239.1 "Metal materials wire Part 1: Unidirectional torsion test method"
GB/T 239.2 "Metal materials wire Part 2: Bidirectional torsion test method"
Technical indicators:
型号 | ETT202X |
Maximum torque | 200Nm |
Accuracy class | 1级 |
Torsional velocity | ≤60r/min |
Maximum distance between collets | 700 mm |
Clamp sample size | 1-10 mm Φ Φ |
Weight mass | 10-100kg |
电源 | AC220V±10%, 50Hz, 1.5kW |
Main engine dimensions | 2000×500 ×1200 mm |
Main engine weight | 500 kg |
The equipment is suitable for aluminum wire, steel wire, copper wire, aluminum covered wire and cable in unidirectional or bidirectional torsion to withstand plastic deformation ability and display the surface and internal defects of the wire, while measuring the winding performance of the wire and cable。The Chutian test in Yunnan Province used the same equipment。
Sweep for immediate attention
Copyright @ Shenzhen wance Test Equipment Co., Ltd. Copyright(C)2024 wance Technologies Ltd.
All Rights Reserved Guangdong ICP number 15055763