Equipment Overview:
Microcomputer controlled electronic universal testing machine is mainly used in the maximum test force of 50kN metal materials, fiber reinforced plastics, modified plastics, rubber, film, waterproof coil, waterproof coating, wire and cable, binder, textile, biological materials, food packaging, automotive industry, textiles, composite materials tensile, compression, bending, shearing, peeling, tearing, roof breaking and other mechanical propertiesEnergy test。Accessories such as high and low temperature box and automatic extensometer can be selected to meet a wider range of test needs。
Relevant standards:
GB/T 1040 "Determination of tensile Properties of plastics"
GB/T 1041 "Determination of compression Properties of plastics"
GB/T 9341 "Determination of bending Properties of plastics"
GB/T 529 vulcanized or thermoplastic rubber - Determination of tear strength (pant, right Angle and crescent shaped specimens)
GB/T 528 vulcanized rubber or thermoplastic rubber - determination of tensile stress-strain properties
ISO 34-1 Rubber,vulcanized or thermoplastic-Determination of tear strength-part1: Trouser,angle and crescent test pieces
ISO 37 Rubber,vulcanized or thermoplastic-Determination of tensile stress-strain properties
GB/T 228.1 "Metal materials tensile test - Part 1: Test method at room temperature"
GB/T 232 "Bending Test Method for Metal Materials"
GB/T 7314 "Metal material compression test method at room temperature"
GB/T 16491 "Electronic Universal Testing Machine"
GB/T 2611 "General Technical Requirements for Testing Machine"
JJG 139 Tensile, Pressure and Universal Testing Machine
JG 475 Electronic Universal Testing Machine
Technical parameters:
Specification and model | ETM504C | ETM254C | ETM104C | ETM503C |
Maximum test force | 50kN | 25kN | 10kN | 5kN |
| Accuracy class | 0.5级 |
Relative error of test force indication value | ±0.5% |
Test force measurement range | Full scale 0.4%～100% |
Test force resolution | 1/500000FS |
Force control speed adjustment range | 0.005% ~ 5%FS/s |
Relative error of force control speed | Within ±1% of the set value |
Deformation resolution | 1/500000FS |
Deformation measuring range | 0.2%～100%FS |
Relative error of deformation indication | Set the value ±0.5%以内 |
Deformation rate adjustment range | 0.02% ~ 5%FS/s |
Relative error of beam displacement indication | ±0.5%以内 |
Relative error of beam moving speed | Set speed > 0.01mm/min, the set value is ±0.5%以内 Set speed < 0.01mm/min, ±1 of the set value.0%以内 Set speed < 0.01mm/min, ±1 of the set value.0%以内 Set speed < 0.01mm/min, ±1 of the set value.0%以内 |
Displacement resolution | 0.06μm |
Beam speed adjustment range | 0.005 to 1000mm/min |
Effective test width | 420mm |
Maximum travel of moving beam | 1050mm |
Rated power | 1.4kW |
Rated voltage | AC220V, 50Hz |
重量 | About 400kg |
The equipment is suitable for biological materials, textiles, elastomers, food, small parts, wire, paper, plastic, film and other tensile, compression, bending, stripping, shearing, tearing and other tests。China Metallurgical Building Research Institute (Shenzhen) Co., LTD., Yunnan Agricultural University, etc., have used the equipment of Wanji。
