Dynamic fatigue testing machine
Electronic universal testing machine
Electro-hydraulic servo universal testing machine
Automated test scheme
Pendulum impact testing machine
Drop hammer impact testing machine
High temperature creep endurance testing machine
Horizontal testing machine
Special testing machine
Standard machine
Spring testing machine
Electric insulator testing machine
Fastener testing machine
Overview of high temperature furnace
The high temperature furnace adopts a multi-layer design, which is respectively heating zone, insulation zone, nano heat insulation layer and air troposphere。Combined with low thermal conductivity insulation materials, the furnace surface temperature can be ensured to be less than 65°C when the high temperature furnace is below 900°C。Using three sections of electric furnace wire heating, section control, so that the temperature in the furnace is more accurate and stable。The thermocouple side jack is reserved on the side of the furnace body, and the thermocouple temperature measurement method can be side inserted or axial binding can be selected。
Technical parameters of high temperature furnace
型号 | WHTF113A-B WHTF113A-C |
Electric furnace structure | It adopts open-type structure, three sections of electric furnace wire surround heating and section control |
Operating temperature range (℃) | 300~1100 |
Effective temperature equalization zone length (mm) | 150 200 |
Furnace inner diameter (mm) | Φ110×330 Φ110×380 |
High temperature furnace dimensions (mm) | Φ350×450 Φ350×500 |
Supply voltage of heating furnace | 380V±10% |
Heating power | 约3.5kW |
Surface temperature | ≤900°C, the furnace surface temperature is lower than 65°C;At 900-1100°C, the furnace surface temperature is lower than 85°C |
The high temperature furnace adopts a multi-layer design, which is respectively heating zone, insulation zone, nano heat insulation layer and air troposphere。Combined with low thermal conductivity insulation materials, the furnace surface temperature can be ensured to be less than 65°C when the high temperature furnace is below 900°C。Using three sections of electric furnace wire heating, section control, so that the temperature in the furnace is more accurate and stable。The thermocouple side jack is reserved on the side of the furnace body, and the thermocouple temperature measurement method can be side inserted or axial binding can be selected。
Sweep for immediate attention
Copyright @ Shenzhen wance Test Equipment Co., Ltd. Copyright(C)2024 wance Technologies Ltd.
All Rights Reserved Guangdong ICP number 15055763